- Description
-
Details
DELTACO e-Charge charging cable, Schuko for type 1, 1 phase, 3.6KW, 6m, black
DELTACO e-Charge EV-1125 charging cable fits all vehicles with a Type1 socket for those who want to charge via a standard wall socket of the type Schuko so-called mode 2 charging. Charging power up to 3.6KW. Adjustable charging current between 10A or 16A. Silver-plated connections guarantee good contact and long service life. Length 6M. The Type1 connector is equipped with dust protection to protect against dust, dirt and moisture during storage. The cable's control box has a built - in earth fault circuit breaker type A. The
cable is made of a TPE material that provides good resistance to oil, abrasion and UV light. The cable is also flexible in cooling.
Cars with Type 1 sockets are e.g. Mitsubishi Outlander.
The charging of the car is monitored through a two-way communication between the car and the control box. When the cable is connected to the car, a self-test is performed which ensures that the cable is correctly connected and that the car is ready to receive power, before charging begins and the control box energizes the cable.
Protection rated according to IP 66. The cable control box has a built-in earth fault circuit breaker. In the event of a ground fault, the power is switched off.
• Extension cables must not be used.
• The cable must not be repaired or spliced as this may affect its safety and function.
• Certification: TUV 2 PfG 1908
• Cable: EV07EE-H, 3G2,5mm² + 1x05mm² + EV07EE-H, 3G2,5mm²
• Rating: IP66
• Weight: 2.05KG
• Working temperature : -25 ° C - + 55 ° C
• 3 year warranty
The Swedish Electrical Safety Board in Sweden, DSB in Norway, Tukes in Finland and the Swedish Safety Board in Denmark all advise against regular charging in ordinary wall and engine heater sockets. NOTE some local deviations occur.
But in general this is recommended:
• Old or incorrect connections and cable branches in the
property can cause hot running at high load, which in
turn can lead to fire. Therefore, have an electrical installation company
check the electrical installation.
• Standard wall and engine heater sockets (Schuko) are not
made for electric car charging and cannot withstand recurring high
loads for a long time - therefore always limit the charge
to 8-10A and hang the control box in a hook.
• An extension cord should not be used as there is a risk that the
fuse will not protect properly. If a
control box or extension cord also ends up on the ground, these
can easily be damaged. Do not use equipment between the socket and the
charging cable. - Additional Information
-
Additional Information
Length, cm 0 Width, cm 0 Height, cm 0 Energijos sąnaudų klasė #N/D Manufacturer DELTACO Manufacturer's code EV-1125 Country of manufacture EAN code 733304804442 User's manual Download Gross weight, kg 2 Net weight, kg 1.8 Package Height, cm 0.0000 Package Width, cm 0.0000 Package Depth, cm 0.0000 Package volume, m3 0 Comment for B2B customer #N/D - Reviews
-